| | ear Sir(s) Please attend following inquiry: Aluminum Alloy (Ingot) Specifications AU5-GT (IU-921012) Composition Silicon (Si): 0.30% Iron (Fe): 0.35% Copper (Cu): 4.20~5.0% Manganese (Mn): 0.10% Magne...
| |
 |
| | alloy 6063 primary aluminium billet diamiter 178mm&203mm used for extrusion presses 99.8 purity aluminium )
| |
|
| | seeking manufacturer Aluminium alloyGrade 5154 annealed 9.5mm dia.in coils minimum 1000Kgs suitable for drawingdown to 0.23mm.Must have mimimum welds per coil and require proof ofproduction etc.
| |
|
| | We require aluminium alloy - A356 with Fe content not more than 0.10%
| |
|
| | alum alloy 99.7% and alum ingots ADC 12
| |
|
| | We interest to buy aluminium alloy ingot ADC12, If you can supply Plz sent your whole offer CIF Plz leave your contact information there.
| |
|
| | need Aluminium T groove profiles for ork table CNC machine
| |
|
| | Detailed Description Aluminum Alloy 7075/T6 dimensions in mm (lxwxh)=(220x162x29) or (440,324,29) or (660,486,29) or (880,648,29
| |
|
| | Detailed Description Hello Can you give us your best price and delay for the following products ALUMINIUM SHEETS ALLOY 1050 H24 WITH PLASTIC PROTECTION 1 SIDE 1500 X 3000 X 1 mm : 1000 KG 1500 X 3000...
| |
|
| | Detailed Description alluminium foil alloy 8011, 6.5 micron thickness, width 920mm, temper soft. id 6 inches, od 26 inches.
| |
|
| | Hello people, I need aluminium alloy adc-12. 500 ton every month.I am from india. please do contact me very urgent.
| |
|
| | Our company has possibility to deliver in your address aluminum alloys without intermediaries, directly, without price rise in price. We are to Russia, St.-Petersburg. Shipment is carried out by se...
| |
|
| | Aluminum Alloy Ingot, Type AU5-GT Dear Sir(s) Please attend following inquiry: Aluminum Alloy (Ingot) Specifications AU5-GT (IU-921012) Composition Silicon (Si): 0.30% Iron (Fe): 0.35% Copper (Cu): ...
| |
|
| | if you could give me a price quote for them. Qty-64 letters at 6 1/2" tall by 1/2" thick Qty- 32 letters at 5 3/4" tall by 1/2" thick Qty- 16 letters at 4 3/4" tall by 1/2" thick Qty- 20 letters at 3 ...
| |
|
| | We request a quote for an Aluminum Alloy as follows: Aluminum Type: AlCu4PbMgMn. shape: Round bars 17 MM. Diameter Qty: 3000'/mo.
| |
|
| | To Whom It Concerns: Looking for Aluminum Channel 6'x 6" to 8" Wide, strong enough to hold 500# balance at the center of gravity, no supports on ether end. Sincerely
| |
|
| | I need any sample material with different grain size. example: Aluminum alloy with grain size 5, 10, 15, 20, 25, 30, 35, 40, 45, 50 micro-meter. sample size 10 x 5 x 2 (not neces...
| |
|
| | Alloy Type Cu% Si % Fe % Mg % Ti % Mn% Zn % Ni % Ag% Be % Sb % Co % Zr % Cr % Others Each % Others Total l% A356 I 0-0.1 6.7-7.3 0-0.16 0.25-0.43 0.08-0.15 0-0.08 0-0.08 0-0.05 0-0.15 A356 II 0-0.1 6....
| |
|
|
|
