| N45 - OD 150 mm, ID 55 mm, Thickness 8 mm with Nickel coated (magnetized through 8 mm only) - QTY 200 Nos. | |
|
| grade 45h , both magnets NdFeB , needing n pole on the convex, and s on the concave face ,i need 12 pieces of each | |
|
| we need BNF9 Bonded Magnet. | |
|
| BxH (energy product)= 35 kj / m3 (or higher) MAX Operating Temp= 180°C Dimension: 40mmx50mmx10mm (N-S axis perpendicular to the 40x50 face) Quantity: 1000 pcs/order | |
|
| we need all kinds of magnets. | |
|
| NE35 9.5 x 2mm Please could you quote based on 25,000 50,000 and 75,000 units, can you provide a cost inclusive of shipping to the UK | |
|
| 10 million pcs / year rod 4mm diameter 7mm length N45 Nickel or epoxy coating. We have a target price of USD 0.014 please let us know if you can match or better this price ? | |
|
| We are in the intial stages to develop a magnetic generator for domestic uses. Would you please quote for us 16 and 32 ferrite magnets, grade 32 premagnetized, dimensions 50x50x20 mm to be shipped t... | |
|
| We are now involved in magnetic motor construction. Please give prices with quantity price breaks of 100/200/500/1000/5000 for neodymium magnets grade N50 imperial size 1/2in x 1/2in x1 inch magnetise... | |
|
| I am prototyping a new design. I need a magnet that is 4 inch diameter with a 1/2 inch wall made out of Samarium Cobalt 18 material. Magnetism through the circumference. I also need 17, 1 x 3/8 x 7... | |
|
| magnets for door assembling | |
|
| Magnet, diameter 50mm, thicknes 15mm, N-45,Ni coating, the magnetization should be trough 15mm in the permanent magnet. Initial quantity for testing would be only 24 pcs, but later on could be much bi... | |
|
| rubber magnet sheets (no adhesive) in the size 118cm x 26cm, quantity 3000 / 6000 / 9000 and 12000 pcs. Also, I'm looking for another sheet with the size 77cm x 26cm, quantity 8000 / 16000 / 24000... | |
|
| Lenghth 6" x Width 8" x Thinkness 0.02", blank in nature. No copy printing. With high magnetic force in one side. | |
|
| Ring Magnet, with OD : 130mm, ID : 120mm, Thick : 25mm, Radial Polarization or Unipolar Bonded NdFeB | |
|
| ferrite magnets for my new products. | |
|
| specs: need 11 inch x 17 inch magnetic boards (will print locally). also need (in sets) magnetic pawns and pushpins. 7 blue pawns 5/8 X 1 inch , 7 red pawns 5/8 x 1 inch, 3 blue pushpins 1/2 x 3/4 inc... | |
|
|
|