| we need your product 1 unit each of type : DBY 25 ; DBY 40 and DBY 50 with diaphragm materil resist with acid and base chemical with pH 2-12 and weted body material is resist with the chemical too,the... | |
|
| CurieJet Piezoelectric Cooling systems diaphragm membrance Micropump | |
|
| What is the duty cycle and pump life in hours. | |
|
| pump for water 5-25 degree C 0.6-10 L/min 12 or 24 VDC suction capacity min 100 mm (4") water pressure min 100 kPa (15 Psi) lifetime: min 300 hours intermittent duty less than 5% Sample to be te... | |
|
| SEAFLO DC Mini Compression Diaphragm Pump 12V 4.0LPM/1.1GPM 80PSI Quantity Required: 10 Pieces Good Morning, I need a quote for 10 SFDP!-011-070-21 pump. Shipped to the USA. Thank you and kind ... | |
|
| In need of small diaphram pump to pump glycol mixture from tank into heating cooling system. .5 liter per minute approx. 120 volts A/C. Must be cable of 50 PSI. An Intregal adjustable pressure switch... | |
|
| DBY Electric Operated Diaphragm Pump Quantity Required: 1 Set We are industrial supplier at Batam, Indonesia. Currently we look for below diaphram pump. Please check if you could quote for us. D... | |
|
| Diaphragm (membrane) single component pump for injection into constraction (or ground) of different resins (PU, epoxy, acrylic) under high pressure. Powered by electricity. Also interesting in spare p... | |
|
| Hi i am after diaphragm pump driven by tractor PTO with following specification: Working pressure 0.3-0.5 Rotating Speed 400-450rpm The above pumo is to be fitted to jet rod sprayers. | |
|
| I am looking for a double-diaphragm pump to pump Hydrogen> The pump can be either air-operated or 12 volt. It must be able to can maintain 40 psi or more. If you can help, please e-mail me. | |
|
| what is the output pressure from the pump. do you have a pump with 0.8 to 1 mpa with supported by 12v9ah. please send details | |
|
| kindly send us your web site or mail i.d. their we can chat more on | |
|
|
|