Eftec - Placosa a company which manufactures waxes, adhesives and sealants for the automotive industry; located in Mexico is looking foward for alternative suppliers that produces The Polyvinyl Chloride. We found by the Directory of World Chemical Producers 2008 that your company produces that material.For this reason, I would like to have a quotation of the product our annual consumption 2007 was 367,920KG. Please send me a quotation for this quantity.
If you need any further information please let me know. Attached you can find the technical information.
I appreciate your attention and support.
Best Regards,
Polyvinyl Chloride
Brief Description
Is a Fine particle-paste making emulsion homopolymer that is readily converted into very high-viscosity plastisols with a good shelf life. Pates based on a blending ratio grater than 100:80 (PVC:DOP) are extremely pseudoplastic and it is also used as a blend component to raise the yield point or to reduce the dilatancy of paste. This applies for instance when laminating fabrics directly into wet foam coats, in automotive underbody sealants or to prevent slumping during spread coating.
Technical Information
Properties of the raw material
Value Unit Test Method
DIN
ISO
K value
Ca. 70 - 53726 1628-2
Viscosity number Ca. 124 Cm3/g 53726 1628-2
Bulk density Ca. 380 G/l 53466 60
Particle size: Retained on 63-mm sieve < 3 % 53195 1624
Volatiles < 0.5
% - 1269
Emulsifier content Médium - - -
82743.[MX]
墨西哥求购聚氯乙烯(Polyvinyl Chloride) 
